Product Features
Durable
Convenient construction
Super water resistance
Strong adhesion
Green and environmental protection
Construction Technology
1, In the use of back glue should first finish the base surface flat, clean the surface residue and stains.
2. Before painting or renovating the surface of the old wall, just use a short wool roller to paint it.
3, Paste the tile about 2 hours in advance with a brown brush or a small roller to stir the back glue evenly, and then directly brush on the back of the tile about 2mm from the edge, do not wait for the surface to dry, directly with ordinary cement to add about one-third of the fine sand mixing mortar paste, can enhance the bonding force of the tile.
Technical Date Sheet
Serial Number | Test Item | Standard Request （Type I for indoor use） | Testing Result |
1 | Tensile bond strength /MPa | ≥0.5 | 0.7 |
2 | Tensile bond strength after immersion /MPa | ≥0.5 | 0.6 |
3 | Drying time ≥20min, tensile bond strength /MPa | ≥0.5 | Drying time 20min, 0.5 |
4 | Remarks | 1.Experimental ratio: Powder:water =1:0.23 (mass ratio) (CF-A). | |
5 | Product modality | Liquid state | |
